PN 10/16 - DN 40...600 Product features Resilient seated, acc. to EN 1171 (DIN 3352 - 4A and 4B) Face-to-face to EN 558-1, basic series 14 and 15 (DIN 3202, F4 and F5) Low torque due to plastic sliding caps on the wedge DVGW tested and registered for water Elastomere approved in acc. with W 270 Final inspection Test to EN 12266 (DIN 3230 part 4)

VAG EKN® EPOXY - Water PN 6...40 - DN 150...3000 Product features To EN 593 Disk double offset Disk with closed disk eyes Automatic soft sealing system Sealing ring can be replaced without dismantling the valve Body seat wear and corrosion resistant due to nickel welded overlay, micro finished With worm gear box with limit stops at the input shaft and psoition indicator Face-to-face to EN 558-1, series 14 (DIN 3202, F4) DVGW approved Final Inspection Test acc. to EN 12266 (DIN 3230, Part 4)

VAG KSS Hollow Jet Discharge Valve PN 16 - DN 400...2200 Product features Flow-through valve with rotationally symmetric flow guidance Installation at pipe end Annular flow cross section in any position Outflow control by cylindrical sleeve gate Special face-to-face length With venting jacket for chamber Installation

VAG SKR Slanted Seat Tilting Disk Check Valve PN 10/16 - DN 200...1200 Product features To EN 12334 To due the slanted seat the stroke is reduces by approx. 30 % and gives a shorter closing time to avoid water hammer Compact design Metall seated, corrosion-proof and wear-resistant Face-to-face per EN 558-1, basic series 14 (DIN 3202, F4) Final Inspection Test to EN 1226 (DIN 3230 Part 4)

VAG DUOJET® Automatic Air Valve PN 10/16/25 - DN 50...200 Product features Single chamber, double orifice triple function air valve Operated by the flow medium Triple function Larger orifice for release of big air volumes Large orifice for intake of big air volumes Small orifice for release of small air volumes during operation under full operation pressure High discharge capacity up to sonic velocity by means of stabilised float Final Inspection Test acc. to EN 12266 (DIN 3230, Part 4)

VAG ERI® Sluice Gate DN 150x150...1200x1200 Product features Leak proof on both sides: 150x150 till 1200x1200: Upstream pressure: 150x150 - 1000x1000: 6m WS 1200x1200: 4m WS Downstream pressure: 150x150 - 800x800: 4m WS 900x900 - 1200x1200: 3m WS Compact design Simple and quick installation with few pins The pinned Sluice Gate Valve is ready for use after installation No block outs necessary, thereby no costs for labor, materials, housing, casting and cleaning