Application :
- Domestic, industrial water supply.
- Community water supply
- Fire fighting application
- Various civil applications
VM model
Vertical multi-stage centrifugal pump
·They are used for the liquid, which is cold, hot,clean, non-flammable, non-explosive and not including solid granule.
·Liquid temperature:-15℃ to +120℃
OEM customer : - Hong Nhut Thermal Company.
- Martech Boiler company.
- Hong Tuoi Thermal company.
SPCO motors for submersible pumps for media temperature up to 50°C!
Motors 4" Single/three phase encapsulated motors
Motors 6", 8", 10" . SPCO submersible pumps UG and UG A for deep wells starting from 4“ (DN 100) and with
flow up to 280 m3/h. All essential parts, such as shaft, impellers and intermediate chambers are made
of fully stainless steel AISI 304. The sealings are made of corrosion- and chemical resistant materials
and the bearings consist of hard metal / ceramic combination.
The light stainless steel construction allows high efficiency through which the energy consumption is
drastically reduced. The cost and time for installation is lower due to the light weight of the stainless
steel sheet metal pump construction.
ASE. Axial Split Casing Pump
The new ASE meets a wide range of requirements, thanks to a number of special design characteristics.
Excellent NPSH values, maximum efficiency and minimum operating costs.
TCH
Monostage centrifugal pumps with closed impeller according to ISO 2858 & 5199 (series TCH). Capacity to 1200 m3/h, max pressure 16 bar.
TRH
Double stage liquid ring vacuum pumps. Capacity to 3500 m3/h, max vacuum 33 mbar.
TRS
Single stage liquid ring vacuum pumps. Capacity to 3500 m3/h, max vacuum 150 mbar.
TRM
Close-coupled single stage liquid ring vacuum pumps. Capacity to 270 m3/h, max vacuum 33 mbar.
TRVK
Single stage liquid ring vacuum pumps. Capacity to 30000 m3/h, max vacuum 40 mbar.
TRSK
Single stage liquid ring vacuum pumps. Capacity to 30000 m3/h, max vacuum 40 mbar.
SA
The SA Double Acting Liquid Ring Compressor was specifically designed to meet the stringent medical air requirements for providing oil free medical air.
TRVX
Single stage liquid ring vacuum pump with capacity up to 60 m 3/h. Maximum vacuum up to 33 mbar. By means of ejector it is possible to reach 7 mbar.
TCD
Monostage centrifugal pumps with closed impeller for thermal oil. Capacity to 350 m3/h, max pressure 10 bar.
TBH Self-priming centrifugal pumps. Capacity to 70 m3/h, max pressure 35 bar. AT Self-priming centrifugal pumps derived from TBH, but with double channels for lower NPSH. Capacity to 31 m3/h, max pressure 7 bar. TBA Self-priming centrifugal pumps with low NPSH. Capacity to 35 m3/h, max pressure 35 bar. TBK Magnetic drive self-priming centrifugal pumps derived from TBH. Capacity to 70 m3/h, max pressure 16 bar. TBAK Magnetic drive self-priming centrifugal pumps derived from TBA. Capacity to 35 m3/h, max pressure 16 bar.
Single-stage annular casing pumps in a space-saving close-coupled design in deep drawn chrome nickel steel. For pumping clean, slightly contaminated/ corrosive liquids without abrasive and solid matter.
Single-stage volute casing pumps in a space-saving close-coupled design. For pumping clean, slightly contaminated/ corrosive liquids with a viscosity of up to 150 mm2 /s.
Single-stage volute casing pumps for pumping clean, slightly contaminated/ corrosive liquids up to a viscosity of 150 mm2 /s without abrasive and solid matter. Maintenance-friendly process design: Removal of rotor with casing in situ (back pull-out).
Single-stage annular casing pumps in deep drawn chrome nickel steel. Principal dimensions and nominal capacities as defined by DIN EN 733. For pumping clean, slightly contaminated/ corrosive liquids without abrasive and solid matter. Maintenance-friendly process design: Removal of rotor with casing in situ (back pull-out).